|
Sheath Systems
The ESEE line features the most innovative
sheathing in the market. Every sheath has multiple carry options and can be used
for the latest high-tech tactical rig or simply carried on a belt.
All
ESEE-3 /4
knives will accept an optional jump-proof MOLLE back that includes a drop-leg extender ring, belt
loop, tie-down holes, and heavy duty MOLLE strap. With the MOLLE back
attached, each sheath has three
retention devices:
-
1) A friction fit,
molded blade cover in coyote brown.
-
2) A Velcro retainer strap.
-
3) An
elastic pommel cover that is un-obtrusive until you pull it over the butt of the
knife.
MOLLE Back and
Pouches are also available for the ESEE-5 and ESEE-6 Sheaths. Important: View this to properly
attach a MOLLE back to MOLLE compatible gear. Failure to thread the
MOLLE strap correctly may cause the snap to come apart!
Cordura MOLLE backs
for the s and 4 and different color
molded sheaths (including IR compliant Foliage
Green) can be purchased on our "Additional Gear" page. The
ESEE-3 sheath
system is also designed so the MOLLE back plate can be removed and the Nylon
sheath carried via a boot clip (included), Tek-Lok or MOLLE Lock system (sold separately on the
"Additional Gear" page). The system also
works as a survival knife sheath by allowing the user to
securely store a
considerable length of paracord by wrapping around the sheath and through the
lashing holes. Also see sheath
instruction page for installing Tek-Loks, MOLLE Locks, and proper knife
removal techniques from the friction fit molded sheath. Custom
Fitting The Sheath Tension: If the
sheath fits too tightly against your knife, move the top two screws (that holds
the molded sheath to the MOLLE back) to the extra set of holes below the top set.
You can then heat the top part of the sheath with a hair dryer and spread it
apart to loosen the friction fit. In many cases simply moving the screws and
spreading without a hair dryer will allow enough tension release for a looser
fit. Patent Pending 
|